[vc_row][vc_column css=”.vc_custom_1561460724333{background-color: #f4f4f4 !important;}”][vc_custom_heading text=”پاور آمپلی فایر 5000 وات – XP 5000″ font_container=”tag:h2|text_align:center|color:%23dd3333″ use_theme_fonts=”yes”][vc_column_text]
Stereo Mode (both channels driven) | Continuous Average Output Power Per Channel |
2 ohms EIA 1kHz 1% THD | 2500W |
4 ohms EIA 1kHz 0.1% THD | 1800W |
8 ohms EIA 1kHz 0.1% THD | 1100W |
4 ohms FTC 20Hz-20kHz 0.1% THD | 1600W |
8 ohms FTC 20Hz-20kHz 0.1% THD | 1050W |
Bridge Mono Mode | Continuous Average Output Power |
4 ohms EIA 1kHz 1% THD | 5000W |
8 ohms EIA 1kHz 0.1% THD | 3600W |
8 ohms FTC 20Hz-20kHz 0.1% THD | 3200W |
Distortion (SMPTE-IM) | <0.02% |
Distortion (Typical) 20Hz-20kHz: 10dB below rated power | <0.02% |
Distortion (Typical) 1kHz and below: full ratez power | <0.02% |
Frequency Response | 20Hz-20kHz, 8 ohms, LF filter bypassed, +0/-1dB 5Hz to 50kHz, 8ohms, LF filter bypassed, +0/-3 dB |
Damping Factor | >250 @ 8 ohms |
Noise (unweighted) | 100 dB below rated output (20 Hz to 20kHz, 8 ohms load) |
Input sensitivity | 1.42 Vrms for 1000 watts into 8 ohms |
Control Front | AC power switch, Ch1 & Ch2 gain control with 41 detents |
Control Rear | 12-pole DIP switch featuring high pass filter on/off, high pass filter 30/50Hz, Clip Limiter on/off control for each channel and switches for selecting Stereo, Parallel, or Bridge Mode.Push-button circuit breaker for each channel. Slide switch for Grounding / Floating aa |
Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
Cooling | Dual continuous variable-speed fans, front-to-rear air flow |
Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
Indicators | Power-On: Amber SENPRINI logo; Parallel: Green backlight icon; Bridged: Red backlight icon; CLIP/LIM: Red LED; PROTECT: Yellow LED Green LED for -10dB, -20dB and -40dB Signal Lights |
Connectors Input | XLR, 1/4”TRS jacks and barrier strip |
Connectors Output | Binding posts and speakon outputs (Ch1 speakon wired for biamp) |
Protection | Short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into mismatched loads |
Load Protection | on/off muting, DC fault output crowbar |
Output Circuitry | Class H Amplifier |
Power Requirements | 220-240VAC (+/- 10%), 50Hz |
Circuit Breakers | two (one for each channel): 230 V : 10 amp |
Dimensions (WxHxD) | 482 x 150 x 400mm (19″ x 5.9″ x 15.7″) |
Weight | 30.2kg (66.6bs) |
[/vc_column_text][vc_column_inner width=”1/6″][/vc_column_inner][/vc_column][/vc_row]
جعفری –
سلام امپدانس خروجی چند اهم میباشد یا به عبارت ساده چندتا باند ۱۶ اهم رو میشه روی هر کانال بست؟