پاور آمپلی فایر 1920 وات – XP 2000
Stereo Mode (both channels driven) | Continuous Average Output Power Per Channel |
2 ohms EIA 1kHz 1% THD | 960W |
4 ohms EIA 1kHz 0.1% THD | 660W |
8 ohms EIA 1kHz 0.1% THD | 450W |
Bridge Mono Mode | Continuous Average Output Power |
4Ω 1KHz 1% THD | 1920W |
8Ω 20Hz-20KHz 0.1% THD | 1200W |
Input sensitivity @ 8 Ω | 1.73 Vrms |
Input sensitivity @ 4 Ω | 1.23 Vrms |
Noise (unweighted 20Hz-20KHz below rated output) | 107 dB |
Distortion (SMPTE-IM) | <0.02% |
Damping Factor | >500 @ 8Ω |
Frequency Response | 20Hz-20KHz, 0/-1dB, -3dB points: 5Hz-100KHz |
Input Impedance | 20 kΩ balanced, 10 kΩ unbalanced |
Noise (unweighted) | 100 dB below rated output (20 Hz to 20kHz, 8 ohms load) |
Cooling | (Dual continuous variable-speed fans, front-to-rear air flow |
Control Front | AC power switch, Ch1 & Ch2 gain control with 41 detents |
Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
Indicators | Power-On: Amber SENPRINI logo; Parallel: Green backlight icon; Bridged: Red backlight icon; CLIP/LIM: Red LED; PROTECT: Yellow LED Green LED for -10dB, -20dB and -40dB Signal Lights |
Connectors Input | XLR, 1/4”TRS jacks and barrier strip |
Connectors Output | Binding posts and speakon outputs (Ch1 speakon wired for biamp) |
Protection | Short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into mismatched loads |
Load Protection | on/off muting, DC fault output crowbar |
Output Circuitry | Class H Amplifier |
Power Requirements | 220-240VAC (+/- 10%), 50Hz |
Power Consumption | 880W |
Circuit Breakers | one for both channel |
Dimensions (WxHxD) | 482 x 105 x 400mm (19″ x 5.9″ x 15.7″) |
Weight | 20.68kg (45.6lbs) |
جعفری –
با سلام قدرت خروجی صدا بی نظیره، به اندازه ای که اینورتر ۲۰۰۰ کم می آورد. ای کاش برای محصولات بینظیرتون کاتالوگ فنی هم قرار میدادین